Loading ...
Loading ...
Loading ...
||
DRIVER SUPPORT
190
In the event of automatic deactivation, an audible
signal will sound and the message
Cruise
control Cancelled is shown in the instrument
panel. The driver must then intervene and adapt
the vehicle's speed to the surrounding traffic and
regulate the distance to the vehicle ahead.
An automatic switch to standby mode may be
caused if:
•
engine speed (rpm) is too high/low
•
The driver's door is opened
•
The driver unbuckles his/her seat belt
•
the vehicle's speed goes below 18 mph
(30 km/h)
•
the wheels lose traction
•
brake temperature is high
•
the radar sensor is obstructed by, for exam-
ple, wet snow or rain.
Resuming the set speed
If ACC is in standby mode, it can be reactivated
by pressing the
button on the steering wheel
keypad. The vehicle will return to the most
recently set speed.
WARNING
The vehicle may accelerate quickly after
has been pressed if its current speed is con-
siderably lower than the set speed.
Turning ACC off completely
Controls and display
Resume previous settings.
Off/On/Standby mode
•
From standby mode, press (2)
once.
•
From active mode, press (2)
twice.
The set speed and time interval are then cleared
from the system's memory and cannot be
resumed by pressing (1)
.
Related information
•
Adaptive Cruise Control – introduction
(p. 183)
Adaptive Cruise Control – passing
another vehicle
Passing another vehicle
If your vehicle’s speed is being regulated by ACC
and the driver indicates that he/she would like to
pass the vehicle ahead by using the left turn sig-
nal, ACC can assist by accelerating briefly.
This function is active at speeds above approxi-
mately 45 mph (70 km/h).
WARNING
Please be aware that this function will also
cause the vehicle to accelerate briefly in cer-
tain situations other than passing another
vehicle, for example using the left turn signal
to indicate a lane change or a turn toward a
highway exit at speeds above approximately
45 mph (70 km/h).
Related information
•
Adaptive Cruise Control – introduction
(p. 183)
Loading ...
Loading ...
Loading ...