Loading ...
Loading ...
Loading ...
LOADING AND STORAGE
}}
149
Mounting in the front position
1. Fold out the cargo net. Be sure the net's
storage pockets are facing rearward.
2. Attaching the net is easier if the front seats
are moved as far forward as possible.
3. Insert one of the net's upper attachments
into one of the front brackets near the roof
liner.
4. Insert the net's other attachment into the
bracket on the opposite side of the vehicle.
Be sure to press the hooks as far forward
into the brackets as possible.
5. Attach the lower hooks to the eyelets on the
front seat floor rails. Tighten the camlock by
pressing down its tongue and tightening the
strap.
If the front seats are moved rearward, they should
not press hard against the net.
CAUTION
When moving the front seats with the cargo
net installed, only move the seat(s)/back-
rest(s) rearward until they touch the net.
Excessive pressure from the front seats
against the cargo net could damage the net
and/or its brackets.
Removing and storing the cargo net
1. Release the lower hooks.
2. Remove the net's upper attachments from
the ceiling brackets.
3. Fold the net.
When not in use, the cargo net can be stored
under floor of the cargo area.
Related information
•
Loading – general (p. 146)
•
Steel cargo grid (p. 150)
Cargo area cover
The cargo area cover can be used to conceal
objects in the cargo area.
Use
•
Pull the cover over the cargo and hook it into
the holes in the rear cargo area pillars.
•
To retract (roll up) the cover, release it from
the holes and guide it toward the rear seat
backrest.
Installing the cover
1. Press the end piece on one side of the cargo
area cover into the retaining bracket in the
side panel of the cargo area
.
2.
Do the same on the opposite side
.
Loading ...
Loading ...
Loading ...