Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
203
•
City Safety – symbols and messages
(p. 207)
•
City Safety – Laser sensor (p. 208)
City Safety – function
Function
Location of the laser sensor in the windshield
7
City Safety™ monitors traffic ahead of you using
a laser sensor mounted in the upper section of
the windshield. If a collision is imminent, City
Safety™ will automatically apply the brakes,
which may feel like hard braking.
If the difference in speed between your vehicle
and the vehicle ahead is more than approximately
9 mph (15 km/h), City Safety™ alone cannot
prevent a collision from taking place. The driver
must apply the brakes to help avoid a collision or
reduce its effect.
When the function activates and applies the
brakes, a message will appear in the information
display to indicate that the system is/has been
active.
NOTE
•
When City Safety™ applies the brakes,
the brake lights will illuminate.
•
In cases where City Safety™ has stopped
the vehicle, the system will then release
the brakes. The driver must apply the
brakes to keep the vehicle at a standstill.
Related information
•
City Safety – introduction (p. 202)
•
City Safety – operation (p. 204)
•
City Safety – limitations (p. 204)
•
City Safety – troubleshooting (p. 205)
•
City Safety – symbols and messages
(p. 207)
•
City Safety – Laser sensor (p. 208)
7
The illustration is generic; certain details may vary from model to model
Loading ...
Loading ...
Loading ...