Loading ...
Loading ...
Loading ...
1. With Model S in Park, stand within 10 feet (3 meters) and press and hold the top center button
on the key (Lock/Unlock All button) until the hazard lights blink continuously.
Note: The hazard lights flash once as Model S locks, then within five seconds, Model S powers
on and the hazard lights flash continuously. Do not proceed to the next step until the hazard
lights are
flashing. If, after five seconds, the hazard lights are not flashing, release the button
on the key, move closer to Model S, and try again. If Summon receives no further input within
ten seconds, Summon cancels.
2. Press the Front Trunk (Frunk) button on the key to move Model S forward into the parking
space, or press the Rear Trunk button to reverse Model S into the parking space.
Initiate Automatic Parking Before Exiting the Vehicle (U.S. and Mexico Only)
If Require Continuous Press is set to NO, you can initiate the parking maneuver from inside
Model S before exiting:
1. While sitting in Model S with the vehicle powered on, double press the Park gear.
The instrument panel displays a message indicating that Summon is engaged, and the
touchscreen displays a popup window.
2. On the touchscreen, choose the direction of travel.
3. Exit Model S and close the door.
Note: All doors and trunks must be closed.
Note: To cancel the parking maneuver before exiting the vehicle, touch Cancel on the popup
window.
Summon now drives Model S into the parking space according to the direction you
specified on
the touchscreen.
Stopping or Canceling Summon
You can stop Model S at any time while Summon is active by pressing any button on the key or
using the mobile app. Summon also cancels when:
• A door handle is pressed or a door is opened.
• You interact with the steering wheel, brake pedal, accelerator pedal, or gear stalk.
• Model S detects an obstacle and cannot move forward for more than two seconds.
• Summon has moved Model S the maximum distance of approximately 39 feet (12 meters).
Limitations
Summon is unlikely to operate as intended in the following types of situations:
• The road is sloped. Summon is designed to operate on
flat roads only.
• Summon has detected a raised concrete edge when moving forward into the parking location.
Summon does not drive forward over an edge that is higher than approximately 1" (2.5 cm).
• One or more of the ultrasonic sensors is damaged, dirty, or obstructed (such as by mud, ice,
or snow).
• Weather conditions (heavy rain, snow, fog, or extremely hot or cold temperatures) are
interfering with sensor operation.
• The sensors are
aected by other electrical equipment or devices that generate ultrasonic
waves.
Warning: The list above does not represent an exhaustive list of situations that may interfere
with proper operation of Autopark's Summon feature. It is the driver's responsibility to remain
in control of Model S at all times. Pay close attention whenever Summon is actively moving
Model S and stay prepared to take immediate action.
Autopark
82 Model S Owner's Manual
Loading ...
Loading ...
Loading ...