Loading ...
Loading ...
Loading ...
42
EN
o
/
Y
Sets the sequential shooting function and the
time from pressing the shutter button until the
picture is taken.
o
Single
One frame is shot each time the shutter button is
pressed.
T
Sequential High
Hold the shutter-release button all the way down to
take a series of photographs.
•
To choose a frame advance rate, highlight
[Sequential High] and press the INFO button
before you press the A button. Choose from frame
advance rates of approximately 10 frames per
second (10 fps) or 20 frames per second (20 fps).
Use FGHI (arrow pad) or the control dial to
highlight a frame advance rate and press the A
button to select.
S
Sequential Low
Pictures will be taken at about 5 fps while the shutter
button is pressed al the way down.
Y
12
Y
12 sec
The self-timer lamp turns on for approx. 10 seconds,
then blinks for approx. 2 seconds, and then the
picture is taken.
Y
2
Y
2 sec
The self-timer lamp blinks for approx. 2 seconds,
then the picture is taken.
Y
C
Custom
Self-timer
Photographs are taken at “the time from pressing the
shutter button until the picture is taken, the number
of frames, and the interval time” which you set.
J
Pro Capture
Sequential shooting begins when you press the
shutter button halfway. Press the shutter button all
the way down to begin recording captured images to
the card, including those for a halfway press.
g
“Pro Capture” (P. 31)
Metering mode Metered area
5
Spot
Shoots the subject at the center during backlighting
(Meters the brightness at the center of the screen).
p
ESP
Shoots to obtain a balanced brightness over the
entire screen (Meters the brightness at the center
and surrounding areas of the screen separately).
When set to [ESP], the center may appear dark
when shooting against strong backlighting.
Loading ...
Loading ...
Loading ...