Loading ...
Loading ...
Loading ...
110
EN
After Use:
• Be sure to wipe off any excess water or debris after using the camera under
water.
• After the camera is used under seawater,
immerse the camera in a bucket containing fresh
water for about 10 minutes (with the battery/
card compartment cover and connector cover
firmly closed, the lock in place and the lens ring
removed). After that, let the camera dry in a shaded
location with good ventilation.
• When opening the battery/card compartment cover
or connector cover, open slowly with the camera
orientated as shown in the following illustration
to prevent water drops entering the camera. If any
water drops are found on the inner side of the
cover, be sure to wipe them off before using the camera.
Storage and Maintenance
• Do not leave the camera in an environment at high temperature (40°C (104°F)
or more) or at low temperature (–10°C (14°F) or less). Failure to do so may
break down water resistance.
• Do not use chemicals for cleaning, rust prevention, anti-fogging, repairing, etc.
Failure to do so may break down water resistance.
• Do not leave the camera in water for a long time. Prolonged exposure to
water will cause damage to the camera’s appearance and/or deteriorate
water resistance.
• In order to preserve the water resistant feature, as with any underwater
housing, it is recommended that the waterproof packing (and seals) are
replaced annually.
For the Olympus distributors or service stations where the waterproof
packing can be replaced, visit Olympus website for your local area.
• The included accessories (e.g. USB-AC adapter) do not offer shock or water
resistance.
Battery/card
compartment cover
Loading ...
Loading ...
Loading ...