Loading ...
Loading ...
Loading ...
123
EN
• Always observe the operating environment restrictions described in the camera’s manual.
• Insert the battery carefully as described in the operating instructions.
• Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality.
• Always unload the battery from the camera before storing the camera for a long period.
• When storing the battery for a long period, select a cool location for storage.
• Power consumption by the camera varies depending on which functions are used.
• During the conditions described below, power is consumed continuously and the battery becomes exhausted
quickly.
• The zoom is used repeatedly.
• The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus.
• A picture is displayed on the monitor for an extended period of time.
• The camera is connected to a printer.
• GPS is used.
• Using an exhausted battery may cause the camera to turn off without displaying the battery level warning.
• If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry
cloth before use.
• Always charge a battery when using it for the fi rst time, or if it has not been used for a long period.
• When operating the camera with battery power at low temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at
room temperature.
• Before going on a long trip, and especially before traveling abroad, purchase extra batteries. A recommended
battery may be diffi cult to obtain while traveling.
• For plug-in type USB-AC adapter:
Connect the plug-in type USB-AC adapter F-5AC correctly by plugging it vertically into the wall outlet.
Using the wireless LAN function
Using the wireless LAN function
•
Turn off the camera in hospitals and other locations where medical equipment is present.
The radio waves from the camera may adversely affect medical equipment, causing a malfunction that results
in an accident.
•
Turn off the camera when onboard aircraft.
Using wireless devices onboard may hinder safe operation of the aircraft.
Precautions when using the wireless LAN function
Precautions when using the wireless LAN function
If using the wireless LAN function in a country outside the region where the camera was purchased, there is a
risk that the camera will not conform to the wireless communication regulations of that country. Olympus will not
be held responsible for any failure to meet such regulations.
GPS function, electronic compass
GPS function, electronic compass
• In a location not open to the sky (inside, underground, underwater, in a forest, near high buildings) or in a
location subject to strong magnetic or electric fi elds (near new high-voltage power lines, magnets or electrical
goods, 1.5GHz mobile telephones), it may not be possible to determine measurements or generate errors.
• The altitude displayed on the measurement information screen or picture playback screen etc. is displayed/
recorded based on information from pressure sensors built into camera body. Be careful since the displayed
altitude is not based on GPS position measurements.
• Electronic compass errors may be caused by the effects of strong magnetic or electrical fi elds (such as
televisions, microwaves, large motors, radio towers and high-voltage lines). To restore the electronic compass
function, hold the camera fi rmly and move in a fi gure of 8 while turning your wrist over.
• Since the GPS function and electronic compass function are not required to be accurate, there is no
guarantee that the measured values (latitude, longitude, compass direction etc.) are accurate.
Monitor
Monitor
• Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode
failure or damage to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.
• When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is
not a malfunction; it will be less noticeable in playback mode.
Loading ...
Loading ...
Loading ...