Loading ...
Loading ...
Loading ...
Depending on t he nature of the event the left
and right turn signal lights, located in the instru-
ment panel, may both be blinking and will con-
tinue to blink. In order to move your vehicle to
the side of the road, you must follow the system
reset procedure.
Customer Action
Customer Will See
NOTE:
Each step MUST BE
held for at least two
seconds
1. Turn ignition STOP/
OFF/LOCK. (Turn Sig-
nal Switch Must be
placed in Neutral
State).
2. Turn ignition MAR/
ACC/ON/RUN.
Right turn light
BLINKS.
Left turn light is OFF.
3. Turn right turn signal
switch ON.
Right turn light is ON
SOLID.
Left turn light BLINKS.
4. Place turn signal in
neutral state.
Right turn light is OFF.
Left turn light BLINKS.
Customer Action
Customer Will See
NOTE:
Each step MUST BE
held for at least two
seconds
5. Turn left turn signal
switch ON.
Right turn light
BLINKS.
Left turn light is ON
SOLID.
6. Place turn signal in
neutral state.
Right turn light
BLINKS.
Left turn light is OFF.
7. Turn right turn signal
switch ON.
Right turn light is ON
SOLID.
Left turn light BLINKS.
8. Place turn signal in
neutral state.
Right turn light is OFF.
Left turn light BLINKS.
9. Turn left turn signal
switch ON.
Right turn light is ON
SOLID.
Left turn light is ON
SOLID.
10. Turn left turn signal
switch OFF. (Turn Sig-
nal Switch Must be
placed in Neutral
State).
Right turn light is OFF.
Left turn light is OFF.
Customer Action
Customer Will See
NOTE:
Each step MUST BE
held for at least two
seconds
11. Turn ignition STOP/
OFF/LOCK.
12. Turn ignition MAR/
ACC/ON/RUN. (Entire
sequence needs to be
completed within one
minute or sequence
will need to be re-
peated).
System is now reset
and the engine may be
started.
Turn hazard flashers
OFF (Manually).
If a reset procedure step is not completed within
60 seconds, t hen the turn signal lights will blink
and the reset procedure must be performed
again in order to be successful.
83
Loading ...
Loading ...
Loading ...