Loading ...
Loading ...
Loading ...
If a key fob is detected inside of the vehicle, and
no other active key fob is detected outside of the
vehicle, the doors will automatically unlock and
the turn signals will flash. This system will remain
active to prevent accidentally leaving the key fob
in the vehicle if Passive Entry is manually disabled.
WARNING!
• Never leave children alone in a vehicle, or
with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is
dangerous for a number of reasons. A child
or others could be severely injured or killed.
Children should be warned not to touch the
parking brake, brake pedal, or the gear
selector. Do not leave the key fob in or near
the vehicle, or in a location accessible to
children, and do not leave the ignition of a
vehicle equipped with Keyless Enter- N-Go
in the ON/RUN mode. A child could start
the vehicle, operate power windows, other
controls, or move the vehicle.
•
Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up
may cause them to be severely injured or
killed.
To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built
into the electronic liftg ate release. With a valid
Passive Entry key fob within 3 ft (1.0m)ofthe
liftgate, push the Electronic Liftgate release to
open with one fluid motion.
NOTE:
If “Unlock All Doors 1st Press” is programmed in
the instrument cluster display, if equipped, the
liftgate will unlock along with the vehicle doors.
If "Unlock Driver Door 1st Press" is programmed
in
Uconnect, the liftgate will unlock when you push
the electronic lock/unlock button on the liftgate.
For further information, refer to “Uconnect Set-
tings” in “Multimedia.”
To Lock The Liftgate
With a valid Passive Entry key fob within 3 ft
(1.0 m) of the liftgate, push the Passive Entry lock
button located to the right of electronic liftgate
release.
While the vehicle is moving, if the liftgate is closed
properly, it will lock automatically when the vehicle
reaches a speed of 12.5 mph (20 km/h) or over.
This fea ture can be disabled using the instrument
cluster. For further information, refer to “Instru-
ment Cluster Display” in “Getting To Know Your
Instrument Panel” in the Owner’s Manual.
NOTE:
The liftgate Passive Entry lock button will lock all
doors and the liftgate. The liftgate unlock feature
is built into the electronic liftgate release.
Passive Entry Liftgate Release Button
1 — Electronic Liftgate Handle
2 — Passive Entry Lock Button
19
Loading ...
Loading ...
Loading ...