Loading ...
Loading ...
Loading ...
REAR PARK ASSIST —
IF EQUIPPED
The Rear Park Assist system provides visual and
audible indications of the distance between the
rear fascia and a detected obstacle when backing
up, e.g. during a parking maneuver.
P
ark Assist will retain the last system state (enabled
or disabled) from the last ignition cycle when the
ignition is changed to RUN mode.
Park Assis t can be active only when the gear
selector is in REVERSE.
Park Assist Sensors
The four Park Assist sensors, located in the rear
fascia/bumper, monitor the area behind the ve-
hicle that is within the sensors’ field of view.
The sensors can detect obstacles from approxi-
mately 12 inches (30 cm) up to 59 inches
(150 cm) from the rear fascia/bumper in the
horizontal direction, depending on the loca tion,
type and orientation of the obstacle.
Chime
By shifting the vehicle in REVERSE, and in the case
of the presence of a rear obstacle, an acoustic
signal that varies with the distance of the obstacle
from the bumper is activated.
The frequency of the acoustic signal:
• Increases with the distance between car and
object decreases.
• Becomes continuous when the distance that
separates the car from the obstacle is less than
approximately 12 inches (30 cm), while termi-
nates immediately if the distance to the obstacle
increases.
• Remains constant if the distance between car
and obstacle remains unchanged. If this situation
occurs for t he side sensors, the signal is stopped
after approximately three seconds to avoid, for
example, it activates in case of maneuver along
a wall.
When the system emits a beeping sound, the
volume of the Uconnect system, if turned on, is
automatically lowered by Park Assist.
Detection Distances
If the sensors detect more obstacles, it is taken
into account only what is the shorter distance.
Instrument Cluster Display
Park Assist is displayed on the instrument cluster
only if you have selected the item "Sound And
Display" inside the "Settings" menu of the Uconnect
system.
If an obstacle is detected in the center rear
region, the display will show a single solid arc in
the center rear region and will produce a one-half
second tone. As the vehicle moves closer to the
obstacle, the display will show the single arc
moving closer to the vehicle and the sound tone
will change from slow, to fast, to continuous.
If an obstacle is detected in the left and/or right
rear region, the display will show a single flashing
arc in the left and/or right rear region and will
produce a fast sound tone. As the vehicle moves
closer to the obstacle, the display will show the
single arc moving closer to the vehicle and the
tone will change from fast to continuous.
111
Loading ...
Loading ...
Loading ...