Loading ...
Loading ...
Loading ...
LANESENSE — IF EQUIPPED
LaneSense Operation
The LaneSense system is operational at speeds
above 37 mph (60 km/h) and below 112 mph
(180 km/h). The LaneSense system uses a for-
ward looking camera to detec t lane markings and
measure vehicle position within the lane bound-
aries.
When both lane markings are detected and the
driver unintentionally drifts out of t he lane (no
turn signal applied), the LaneSense sys tem pro-
vides a haptic warning in the form of torque
applied to the steering wheel to prompt the
driver to remain within the lane boundaries. If the
driver continues to unintentionally drift out of the
lane, the LaneSense system provides a visual
warning through the instrument cluster display
to prompt the driver to remain within the lane
boundaries.
The driver may manually override t he haptic
warning by applying torque into the steering
wheel at any time .
When only a single lane marking is detected and
the driver unintentionally drifts across the lane
marking (no turn signal applied), the LaneSense
system provides a visual warning through the
instrument cluster display to prompt the driver to
remain within the lane. When only a single lane
marking is detected, a haptic (torque) warning will
not be provided.
NOTE:
When operating conditions have been met, the
LaneSense system will monitor if the driver’s
hands are on the s teering wheel and provides an
audible warning to the driver when the driver’s
hands are not detected on the steering wheel.
The system will cancel if the driver does not
return their hands to the wheel.
Turning LaneSense On Or Off
The default status of LaneSense is “off”.
The LaneSense button is located on the end of
the turn signal stalk , located on the left side of the
steering column.
To turn the LaneSense
system on, push the
LaneSense button once.
A “Lane Sense On” mes-
sage is shown in the in-
strument cluster display.
To turn the LaneSense system off, push the
LaneSense button once.
NOTE:
The LaneSense system will retain the last system
state on or off from the last ignition cycle when
the ignition is changed to RUN mode.
115
Loading ...
Loading ...
Loading ...