Loading ...
Loading ...
Loading ...
Engine Oil Change Reset
Your vehicle may be equipped with an engine oil
change indicator system.The “Change Engine Oil”
message will display in the instrument cluster
display. The engine oil change indicator system is
duty cycle based, which means the engine oil
change interval may fluctuate , dependent upon
your personal driving style.
Unless reset, this message will continue to display
each time you turn the ignition switch to the
ON/RUN position. To reset the oil change indi-
cator system (after performing the scheduled
maintenance), refer to the following procedure.
1. Turn the ignition switch to the ON position
(do not start the engine).
2. Fully push the accelerator pedal slowly, three
times, within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system
did not reset. If necessary, repeat this procedure.
Instrument Cluster Display Main Menu
The Main Menu is composed of several options that
can be selected using the control buttons above.
NOTE:
• The display mode of the menu items varies
depending on the type of display.
• For some items, a submenu is provided.
• In the Uconnect system, some items on the
menu are not shown on the instrument cluster
display.
Menu Items
The Menu has the following options:
• Speedometer
• Trip
• Dynamic Selector
• Vehicle Info
• Driver Assist
• Audio
• Phone
• Navigation
• Messages
• Vehicle Settings
For further information on vehicle menu options,
refer to “Instrument Cluster Display” in “Getting
To Know Your Instrument Panel” in the Owner’s
Manual.
WARNING LIGHTS AND
MESSAGES
The warning/indicator lights will illuminate in the
instrument panel together with a dedicated mes-
sage and/or acoustic signal when applicable.These
indications are indicative and precautionary and as
such must not be considered as exhaustive and/or
alternative to the information cont ained in the
Owner’s Manual, which you are advised to read
carefully in all cases. Always refer to the informa-
tion in this chapter in the event of a failure
indication. All active telltales will display first if
applicable. The system check menu may appear
different based upon equipment options and
current vehicle sta tus. Some telltales are optional
and may not appear.
47
Loading ...
Loading ...
Loading ...