Loading ...
Loading ...
Loading ...
To Start The Engine While In Autostop Mode
While in a for ward gear, the engine will start
when the brake pedal is released or the throttle
pedal is depressed. The transmission will auto-
matically re-engage upon engine restart.
Conditions That Will Cause The Engine To Start
Automatically While In Autostop Mode:
• The transmission gear selector is moved out of
DRIVE except in the PARK and NEUTRAL
position.
• To maintain cabin temperature comfort.
• HVAC is set to full defrost mode.
• HVAC system temperature or fan speed is
manually adjusted.
• Battery voltage drops too low.
• Low brake vacuum (e.g. after several brake
pedal applications).
• STOP/START OFF switch is pushed.
• A STOP/START system error occurs.
• 4WD system is put into 4LO mode (if equipped
with 4WD).
Conditions That Force An Application Of The
Electric Park Brake While In Autostop Mode:
• The driver’s door is open and brake pedal
released.
• The driver’s door is open and the driver’s seat
belt is unbuckled.
• The engine hood has been opened.
• A STOP/START system error occurs.
If the Electric Park Brake is applied with the
engine off, the engine may require a manual
restart and the electric park brake may require a
manual release (depress brake pedal and push
Electric Park Brake switch). Refer to “Instrument
Cluster Display” in “Getting To Know Your Instru-
ment Panel” in your Owner’s Manual.
To Manually Turn Off The Stop/Start System
1. Push the STOP/START Off switch (located on
the switch bank). The light on the switch will
illuminate.
2. The “STOP/START OFF” message will appear
in the ins trument cluster display. Ref er to
“Warning Lights And Messages” in “Getting To
KnowYour Instrument Panel” in your Owner’s
Manual.
STOP/START OFF Switch
105
Loading ...
Loading ...
Loading ...