Loading ...
Loading ...
Loading ...
CAUTION!
Idle the vehicle with the air conditioner turned
off until the pointer drops back into the
normal range. If the pointer remains on the
“H” and you hear continuous chimes, turn the
engine off immediately and call for service.
NOTE:
There are steps that you can t ake to slow down
an impending overheat condition:
• If your air conditioner (A/C) is on, turn it off.
The A/C system adds heat to the engine cooling
system and turning the A/C off can help remove
this heat.
• You can also turn the temperature control to
maximum heat, the mode control to floor and
the blower control to high. This allows the
heater core to act as a supplement to the
radiator and aids in removing heat from the
engine cooling system.
WARNING!
You or others can be badly burned by hot
engine coolant (antifreeze) or steam from
your radiator. If you see or hear steam coming
from under the hood, do not open the hood
until the radiator has had time to cool. Never
tr y to open a cooling system pressure cap
when the radiator or coolant bottle is hot.
GEAR SELECTOR OVERRIDE
If a malfunction occurs and t he gear selector
cannot be moved out of the PARK position, you
can use the following procedure to temporarily
move the gear selector:
1. Turn the engine OFF.
2. Apply the Electric Park Brake.
3. Carefully separate the gear selector bezel and
boot assembly from the center console.
4. Press and maintain firm pressure on the brake
pedal.
5. Insert a small screwdriver or similar tool down
into the gear selector override access hole (at
the right front corner of the gear selector
assembly), and push and hold the override
release lever down.
Gear Selector Bezel Location
IN C ASE OF EMERGENCY
138
Loading ...
Loading ...
Loading ...