Loading ...
Loading ...
Loading ...
YC61 Owner’s Manual
51
Display Messages
Appendix
LCD indication Description
Auto power off disabled. This message appears when Auto Power Off is disabled.
Completed. The specified load, save, format, or other Job has been completed.
Connecting to USB device… Currently recognizing the USB flash drive connected to the USB [TO DEVICE]
terminal.
Device number is off. Bulk data cannot be transmitted/received because the device number is off.
Device number mismatch. Bulk data cannot be received because the device numbers do not match.
File or folder already exists. A file/folder having the same name as the one you are about to save already exists.
File or folder path is too long. The file or folder you tried to access cannot be accessed because the maximum amount
of characters indicating the path has been exceeded.
Illegal bulk data. An error occurred while receiving a Bulk data or Bulk Request message.
Illegal file name. The specified file name is invalid. Try entering a different name.
Illegal file. The specified file is unusable by this instrument or cannot be loaded.
Incompatible USB device. USB device which cannot be used with this instrument has been connected to the USB
[TO DEVICE] terminal.
MIDI buffer full. Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error. An error occurred when receiving bulk data.
No device. Device is not connected.
No read/write authority to the file. Indicates that you do not have the authority to read/write the file.
Now receiving MIDI bulk data… Indicates this instrument is receiving MIDI bulk data.
Now transmitting MIDI bulk data… Indicates this synthesizer is transmitting MIDI bulk data.
Please reboot to maintain internal
memory.
Reboot this instrument to restore the internal memory.
Push [PANEL LOCK] Button. Push the [PANEL LOCK] button to disengage panel lock.
Unsupported USB device. This message appears if the plugged-in USB flash drive is either unformatted or
formatted in a way that this instrument does not support. Please format the USB device
using this instrument.
USB connection terminated. Communication with the USB device has been shut down because of the overcurrent to
the USB device. Disconnect the device from the USB [TO DEVICE] terminal, and then
turn on the power of the instrument.
USB device is full. The USB flash drive is full and no more data can be saved. Use a new USB flash drive, or
make space by erasing unwanted data from the storage device.
USB device is write-protected. This message appears when you have attempted to write to a protected USB flash drive.
USB device read/write error. An error occurred while reading or writing to/from a USB flash drive.
Loading ...
Loading ...
Loading ...