Loading ...
Loading ...
Loading ...
YC61 Owner’s Manual
10
Front Panel
1 Bend Lever
For using as the Pitch Bend controller or as to change the
rotation speed of the rotary speaker on the SPEAKER/
AMP Section.
Which of the two functions is used by the Bend Lever
can be set from the [SETTINGS] button → “Controllers”
→ “Bend Lever” → “Mode” (page 49). In the default
settings, this is set to “Pitch Bend.”
NOTE
The pitch bend range can be set for each Section from the
[SETTINGS] button “Controllers” “Bend Lever” “Pitch
Bend Range” (page 49).
2 Modulation Lever (Assignable)
For applying vibrato to the sound.
Another Control Change number can be assigned to this
lever. The assignment of Control Change number can be
set from the [SETTINGS] button → “Controllers” →
“Modulation Lever” → “Assign” (page 49).
NOTE
• The vibrato depth and speed can be set for each Section from
the [SETTINGS] button “Controllers” “Modulation Lever”
“P.Mod Depth”/ “P.Mod Speed” (page 49).
• The Modulation (CC#1) effect is not applied to the Organ
Section when the VCM Organ type (H1 to H3) is selected. To
apply the vibrato effect to the VCM Organ type, use the Organ
Section VIBRATO/CHORUS (page 15).
3 [MASTER VOLUME] knob
For adjusting the overall volume of the instrument.
4 LCD
Displays the system messages, parameter settings, and a
range of other information depending on the function
currently being used.
Settings of LCD and the lamps
To make the following settings, press the [MENU]
button → “Control Panel” → “Display Lights.”
5 Encoder dial/[ENTER] button
For displaying the Live Set View (page 12) on the LCD
and to edit the currently selected parameter. In the
MENU and SETTINGS screens, use this dial to move the
cursor (highlighted) up or down.
Also, pressing the Encoder dial is equivalent to pressing
the [ENTER] button. Use this button to determine the
selected parameter or to execute each operation.
Controls and Functions
2
1
3
4
5
6
7
8
9
)
Live Set
(page 12)
Organ Section
(page 14)
SPEAKER/AMP Section
(page 18)
Section
For setting whether the indicator lamps of
each Section are always lit up (“On”)
regardless of the status of the corresponding
Section [ON/OFF] switch.
Ins Effect
For setting whether the lamps in the EFFECT
1 and 2 areas of the Key A/Key B Sections
are always lit up (“On”) regardless of the
status of each of the EFFECT 1/2 [ON/OFF]
buttons.
LCD SW
For setting whether to display (“On”) or not
display (“Off”) the Top screen of the LCD.
The various setting screens such as the
MENU screens and the SETTINGS screens
are always shown regardless of this setting.
LCD
Contrast
For adjusting the contrast of the LCD.
Loading ...
Loading ...
Loading ...