Loading ...
Loading ...
Loading ...
MENU LIST
YC61 Owner’s Manual
37
MIDI Settings MIDI Control Determines the transmission of MIDI control messages.
When this is set to “On,” MIDI messages corresponding to the controls on the
instrument are transmitted when a setting is changed using the controls (knobs,
etc.), allowing you to receive and record the operation information on DAW
software or an external MIDI device.
When this is set to “Invert,” MIDI messages are transmitted only when you use
the controls of a Section that has been turned off, allowing you to control DAW
software or an external MIDI device. For example, when you have created a Live
Set Sound combining this instrument’s Organ Section and a DAW software’s
strings sound, you can use the operators of the Key A/Key B Sections to control
the volume or filters of the software strings.
Default: Off
NOTE
• When MIDI messages corresponding to controls are received by DAW software or the
like, the settings of the corresponding controls are changed.
• The assignment of MIDI messages to each control is fixed. If you want to control the
parameters on DAW software from the instrument’s controls, perform configurations
on the computer side so that messages corresponding to the controls are
appropriately received. For details about the controls and their corresponding MIDI
messages, refer to page 58.
• MIDI messages for when the Modulation Lever and Bend Lever are operated are
always sent, regardless of this setting.
MIDI Control = Off
MIDI messages are not transmitted even when this instrument is operated.
MIDI Control = On
Corresponding MIDI messages are transmitted when parameters are changed
using the controls on this instrument.
NOTE
Even when the Section [ON/OFF] switch or EFFECT 1/2 [ON/OFF] button is off, MIDI
messages are transmitted if the control lamps are lit for enabling parameter changes, by
the settings of “Display Lights” (page 39).
MIDI Control = Invert
Corresponding MIDI messages are transmitted only when controls in a Section
where the Section [ON/OFF] switch is off are moved.
NOTE
• When this is set to “Invert,” control lamps automatically light up regardless of the
status of the Section [ON/OFF] switch.
• When this is set to “Invert,” settings for “Display Lights” (Section, Ins Effect) cannot be
made.
Tx/Rx Pgm Change Determines whether transmission/reception of Program Change messages
between this instrument and external MIDI devices is enabled (On) or disabled
(Off).
Default: On
Tx/Rx Bank Select Determines whether transmission/reception of Bank Select messages between
this instrument and external MIDI devices is enabled (On) or disabled (Off).
Default: On
Controller Reset Determines whether to keep (Hold) or initialize (Reset) the values of controllers
(Modulation Lever, Foot Controller, etc.) when switching between Live Set
Sounds.
When this is set to “Reset,” the controllers are reset to the default states (below)
when switching between Live Set Sounds.
• Pitch Bend: Center
• Modulation: Minimum
• Expression: Maximum
• Pedal Wah: Minimum
Default: Reset
Function name Description
Loading ...
Loading ...
Loading ...