Loading ...
Loading ...
Loading ...
276
Trouble?
Unable to connect to the server
- The camcorder could not access the external server used for the
Monitor while Out function. Make sure the access point is correctly
connected to the Internet.
-Check that 1 > q > [Date/Time] is set to the correct date
and time.
Unable to obtain a global IP address.
- The access point to which the camcorder is connected has not
been assigned a global IP address. Check the WAN settings of the
broadband router to see if a global IP address has been assigned.
- Several wireless routers are connected to the same home net-
work. Leave only one wireless router to serve as the access point.
Unable to obtain an IP address
- If you are not using a DHCP server, connect using the [Manual
Setup] option and enter the IP address using the [Manual] option
(A 210).
- Turn on the DHCP server. If it is
already on, make sure it is func-
tioning properly.
-Make sure the address range for the DHCP server is sufficient.
- If you are not using a DNS server, set the DNS address to [0.0.0.0].
- Set the DNS server’s IP address in the camcorder.
- Turn on the DNS server. If it is already on, make sure it is function-
ing properly.
-Make sure that the DNS server’s IP address and the name for that
address are correctly configured.
- If you are using a wireless gateway router, make sure all of the
devices in the network, including the camcorder, are configured
with the correct gateway address.
Loading ...
Loading ...
Loading ...