Loading ...
Loading ...
Loading ...
274
Trouble?
IP address conflict
- Change the IP address of the camcorder or of any conflicting
device to avoid the same IP address being assigned to multiple
devices on the same network.
Memory card cover is open
- The memory card slot cover was opened while the memory card
was being accessed. Stop the Wi-Fi function in use and end the
Wi-Fi connection.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal at the
same time. Try the operation again later or perform setup using the
[WPS: PIN Code] or [Search for Access Points] option (A 206).
No access points found
- The access point set in the camcorder could not be found.
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
-Make sure that you use the correct access point’s network name
(SSID
) in the camcorder’s Wi-Fi settings (A 209).
- If the access point is using MAC address filtering, enter the cam-
corder’s MAC address in the access point’s configuration screen.
The access point is not compatible with UPnP
- An access point compatible with UPnP (Universal Plug and Play)
was not found in the connected network. You must use an access
point compatible with UPnP. If your access point is compatible,
make sure UPnP is activated.
Loading ...
Loading ...
Loading ...