Loading ...
Loading ...
Loading ...
General Information
The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC
Rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
NOTE:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’ s authority to operate the
equipment.
Forward Collision Warning (FCW)
The Forward Collision Warning (FCW) system
provides the driver with audible and visual warn-
ings within the instrument cluster display to
warn the driver when it detects a potential
frontal collision. The warnings are intended to
provide the driver with enough time to react,
avoid or mitigate the potential collision.
NOTE:
FCW monitors the information from the forward
looking sensors as well as the Electronic Brake
Controller (EBC), to calculate the probability of
a forward collision. When the system deter-
mines that a forward collision is probable, the
driver will be provided with audible and visual
warnings.
Changing FCW System Status
The Forward Collision W arning settings are lo-
cated in the Uconnect display in the controls
settings.
NOTE:
• The default sensitivity of FCW is the “Me-
dium” setting and the system status is “W arn-
ing & Braking”. This allows the system to warn
the driver of a possible collision with the
vehicle in front using audible/visual warnings
and it applies autonomous braking.
• Changing the FCW status to “Only W arning”
prevents the system from providing limited
active braking, or additional brake support if
the driver is not braking adequately in the
event of a potential frontal collision, but main-
tains the audible and visual warnings.
• Changing the FCW status to “Off” prevents
the system from providing autonomous brak-
ing, or additional brake support if the driver is
not braking adequately in the event of a po-
tential frontal collision. If FCW is set to “Off”,
“FCW OFF” will appear in the instrument
cluster display.
SAFETY
86
Loading ...
Loading ...
Loading ...