Loading ...
Loading ...
Loading ...
CAUTION!
Interior air enters the Rear Automatic Tem-
perature Control System through an intake
grille, located in floor under the passengers’
seats. Do not block or place objects directly
in front of the inlet grille or heater outlets.
The electrical system could overload causing
damage to the blower motor.
Rear Lock
Pressing the Rear Temperature Lock button on
the Uconnect touchscreen, illuminates a lock
symbol in the rear display . The rear temperature
and air source are controlled from the front
Uconnect system.
Rear second row occupants can only adjust the
rear ATC control when the Rear Temperature
Lock button is turned off.
The rear ATC is located in the headliner , near
the center of the vehicle.
• Press the Rear Temperature Lock button on
the Uconnect touchscreen. This turns off the
Rear Temperature Lock icon in the rear tem-
perature knob.
• Rotate the Rear Blower , Rear Temperature
and the Rear Mode Control knobs to suit your
comfort needs.
• ATC is selected by adjusting the rear blower
knob counterclockwise to AUTO.
Once the desired temperature is displayed, the
ATC System will automatically achieve and
maintain that comfort level. When the system is
set up for your comfort level, it is not necessary
to change the settings. You will experience the
greatest efficiency by simply allowing the sys-
tem to function automatically.
NOTE:
It is not necessary to move the temperature. The
system automatically adjusts the temperature,
mode and fan speed to provide comfort as
quickly as possible.
Climate Control Functions
A/C (Air Conditioning)
The Air Conditioning (A/C) button allows the
operator to manually activate or deactivate the
air conditioning system. When the air condition-
ing system is turned on, cool dehumidified air
will flow through the outlets into the cabin. For
improved fuel economy , press the A/C button to
turn off the air conditioning and manually ad-
just the blower and airflow mode settings. Also,
make sure to select only Panel, Bi-Level, or
Floor modes.
NOTE:
• For Manual Climate Controls, if the system is
in Mix, Floor or Defrost Mode, the A/C can be
turned off, but the A/C system shall remain
active to prevent fogging of the windows.
• If fog or mist appears on the windshield or side
glass, select Defrost mode and adjust blower
speed if needed.
• If your air conditioning performance seems
lower than expected, check the front of the
A/C condenser (located in front of the radia-
tor), for an accumulation of dirt or insects.
Clean with a gentle water spray from the front
of the radiator and through the condenser.
MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press and release to toggle between MAX A/C
and the prior settings. The button illuminates
when MAX A/C is on.
49
Loading ...
Loading ...
Loading ...