Loading ...
Loading ...
Loading ...
2. To access the top tether strap anchorages
behind the rear seat, pull the carpeted floor
panel away from the seat back, this will
expose the top tether strap anchorages.
3. Route the tether strap to provide the most
direct path for the strap between the anchor
and the child seat. If your vehicle is
equipped with adjustable rear head re-
straints, raise the head restraint, and where
possible, route the tether strap under the
head restraint and between the two posts. If
not possible, lower the head restraint and
pass the tether strap around the outboard
side of the head restraint.
4. For the center seating position, route the
tether strap over the seatback and headrest
then attach the hook to the tether anchor
located on the back of the seat.
5. Attach the tether strap hook of the child
restraint to the top tether anchorage as
shown in the diagram.
Pulling Down The Carpet Floor Panel To
Access Top Tether Strap Anchorage
Top Tether Strap Anchorage (Located On
Seatback)
Five Passenger Bench Seat Top Tether
Strap Mounting
Seven Passenger Bench Seat Top Tether
Strap Mounting
127
Loading ...
Loading ...
Loading ...