Loading ...
Loading ...
Loading ...
To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:
• Push the unlock button on the key fob.
• Grasp the passive entry unlock door handle (if
equipped, refer to "Keyless Enter-N-Go —
Passive Entry" located in “Doors” in “Getting
To Know Y our V ehicle" for further informa-
tion).
• Cycle the vehicle ignition system out of the
OFF position.
– For vehicles equipped with Keyless
Enter -N-Go — Passive Entry, push the
keyless ignition button (requires at least
one valid key fob in the vehicle).
– For vehicles not equipped with Keyless
Enter -N-Go — Passive Entry, insert a
valid key into the ignition and turn the key
to the ON position.
NOTE:
• The driver's door key cylinder and the liftgate
button on the key fob cannot arm or disarm
the vehicle security alarm.
• The vehicle security alarm remains armed
during power liftgate entry . Pushing the lift-
gate button will not disarm the vehicle secu-
rity alarm. If someone enters the vehicle
through the liftgate and opens any door, the
alarm will sound.
• When the vehicle security alarm is armed, the
interior power door lock switches will not un-
lock the doors.
The vehicle security alarm is designed to protect
your vehicle. However, you can create condi-
tions where the system will give you a false
alarm. If one of the previously described arming
sequences has occurred, the vehicle security
alarm will arm regardless of whether you are in
the vehicle or not. If you remain in the vehicle
and open a door, the alarm will sound. If this
occurs, disarm the vehicle security alarm.
If the vehicle security alarm is armed and the
battery becomes disconnected, the vehicle se-
curity alarm will remain armed when the battery
is reconnected; the exterior lights will flash, and
the horn will sound. If this occurs, disarm the
vehicle security alarm.
DOORS
Keyless Enter-N-Go — Passive Entry
The Passive Entry system is an enhancement to
the vehicle’s Remote Keyless Entry system and
a feature of Keyless Enter -N-Go — Passive En-
try. This feature allows you to lock and unlock
the vehicle’ s door(s) without having to push the
key fob lock or unlock buttons.
NOTE:
• Passive Entry may be programmed ON/OFF.
Refer to “Uconnect Settings” in “Multime-
dia” in the Owner’ s Manual for further infor-
mation.
• If wearing gloves on your hands, or if it has
been raining/snowing on the Passive Entry
door handle, the unlock sensitivity can be
affected, resulting in a slower response time.
• If the vehicle is unlocked by Passive Entry and
no door is opened within 60 seconds, the
vehicle will re-lock and if equipped will arm
the security alarm.
GETTING TO KNOW YOUR VEHICLE
20
Loading ...
Loading ...
Loading ...