Loading ...
Loading ...
Loading ...
White Indicator Lights
— Adaptive Cruise Control (ACC)
Ready Light — If Equipped
This light will turn on when Adaptive Cruise
Control (ACC) has been turned on, but is not set.
Refer to “Adaptive Cruise Control (ACC)” in
“Starting And Operating” for further informa-
tion.
— Custom Mode SRT Indicator Light
This light will turn on when Custom Mode SRT
is active.
— Cruise Control Ready Indicator
This indicator light will illuminate when the
speed control is ready, but not set.
— Set SRT Speed Warning Light — If
Equipped
When Set Speed Warning is turned on, the
speed warning telltale will illuminate in the
instrument cluster with a number matching the
set speed. When the set speed is exceeded, the
indication will light up yellow and flash along
with a continuous chime. Speed W arning can
be turned on and off in the instrument cluster
display.
Refer to “Instrument Cluster Display” in “Get-
ting To Know Y our Instrument Panel” in the
Owner’s Manual for further information.
The number “55” is only an example of a speed
that can be set.
— LaneSense Indicator Light — If
Equipped
When the LaneSense system is ON, but not
armed, the LaneSense indicator light illumi-
nates solid white. This occurs when only left,
right, or neither lane line has been detected. If a
single lane line is detected, the system is ready
to provide only visual warnings if an uninten-
tional lane departure occurs on the detected
lane line.
Refer to “LaneSense — If Equipped" in “Start-
ing And Operating” for further information.
— Valet Mode SRT Indicator
Light
This light will turn on when Valet Mode is active.
Refer to the “Drive Mode Supplement” for fur -
ther information.
Blue Indicator Lights
— High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With the
low beams activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction
lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are
off, pull the lever toward you for a temporary
high beam on, "flash to pass" scenario.
GETTING TO KNOW YOUR INSTRUMENT PANEL
80
Loading ...
Loading ...
Loading ...