Loading ...
Loading ...
Loading ...
WARNING!
that is on a jack. If you need to get under a
raised vehicle, take it to a service center
where it can be raised on a lift.
• Never start or run the engine while the
vehicle is on a jack.
•
The jack is designed to be used as a tool for
changing tires only. The jack should not be
used to lift the vehicle for service purposes.
The vehicle should be jacked on a firm level
surface only. Avoid ice or slippery areas.
Run Flat Tires — SRT Models
SR T models are equipped with “run flat” tires.
Run flat tires allow the vehicle to be driven
approximately 50 miles (80 km) at 55 mph
(88 km/h). Tire service should be obtained to
avoid prolonged run flat feature usage.
WARNING!
Do not exceed 50 mph (80 km/h) if the “Tire
Pressure Monitoring Telltale Light” is illumi-
nated. V ehicle handling and braking may be
reduced. You could have a collision and be
severely or fatally injured.
Jack Location
The scissor-type jack and tire changing tools are
located in rear cargo area, below the load floor.
Rotate the plastic thumb screw on the end of
the jack to loosen the jack and remove from the
bracket.
Spare Tire Stowage
The spare tire is stowed under the rear of the
vehicle by means of a cable winch mechanism.
To remove or stow the spare, use the jack
handle/lug wrench connected to the square
socket extension to rotate the “spare tire drive”
nut. The nut is located under a plastic cover at
the center-rear of the cargo floor area, just in-
side the liftgate opening.
Jack Location
Jack Removal
181
Loading ...
Loading ...
Loading ...