Loading ...
Loading ...
Loading ...
– 42 –
Cleaning Setting
(continued)
System cleaning
The ¿ rst stage of this program cleans the system with a citric acid solution. The second stage runs water
through the system to rinse the pipes.
1
Make a solution of 16
g
citric acid and 200
g
of water, add the solution to
the water tank. Ensure drip tray is empty.
2
Touch once.
3
Select “System cleaning”.
Tapping “+”/“-” or swipe the slider bar until “system cleaning” appears in the display window.
4
Touch once.
Touch the Set key to verify the selection.
5
Touch .
The cooking time appears in the display window and begins to count down. The program will run for
approx. 29 minutes.
6
After the program has paused, empty the drip tray and ¿ ll the steam tank
with water (to max level).
7
Touch .
Touch Start. The program will run for approx. 1 minute. Empty the drip tray after the program has ¿ nished.
Notes:
1. When
appears in the display, run the ‘system cleaning’ program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the steaming
performance will be less effective.
3. Do not remove the drip tray during the drain program. If the drip tray is removed during the program, U12
is displayed and the program will stop.
4. Empty the drip tray and rinse with running tap water after the program has ¿ nished.
F0003BH70QP_OI.indd 42F0003BH70QP_OI.indd 42 2014/7/9 13:37:522014/7/9 13:37:52
Loading ...
Loading ...
Loading ...