Loading ...
Loading ...
Loading ...
3
–
5
Before Driving
Keys
NOTE

Use the following procedure to
change the setting.
1. Switch the ignition off and close
all of the doors and the liftgate/
boot lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
All of the doors and the liftgate/
boot lid lock and the beep sound
activates at the currently set
volume. The setting changes each
time the LOCK button on the key
is pressed and the beep sound
activates at the set volume. (If the
beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed
by doing any one of the following:
 
Switching the ignition to ACC
or ON.
 
Closing the driver's door.
 
Opening the liftgate/boot lid.
 
Not operating the key for 10
seconds.
 
Pressing any button except the
LOCK button on the key.
 
Pressing a request switch.
The operation indicator light À ashes when
the buttons are pressed.
Lock button
To lock the doors and the liftgate/boot
lid, press the lock button and the hazard
warning lights will À ash once.
(With the advanced keyless function
(Except European models))
A beep sound will be heard once.
Loading ...
Loading ...
Loading ...