Loading ...
Loading ...
Loading ...
4
–
119
When Driving
i-ACTIVSENSE
NOTE
 
Under the following conditions, the radar sensors (rear) cannot detect target objects or
it may be dif¿ cult to detect them.
 
A vehicle is in the detection area at the rear in an adjacent driving lane but it does
not approach. The Blind Spot Monitoring (BSM) determines the condition based on
radar detection data.
 
A vehicle is travelling alongside your vehicle at nearly the same speed for an
extended period of time.
 
Vehicles approaching in the opposite direction.
 
A vehicle in an adjacent driving lane is attempting to pass your vehicle.
 
A vehicle is in an adjacent lane on a road with extremely wide driving lanes. The
detection area of the radar sensors (rear) is set at the road width of expressways.
 
In the following case, the À ashing of the Blind Spot Monitoring (BSM) warning
indicator light, and the activation of the warning sound and the warning screen
indicator display may not occur or they may be delayed.
 
A vehicle makes a lane change from a driving lane two lanes over to an adjacent
lane.
 
Driving on steep slopes.
 
Crossing the summit of a hill or mountain pass.
 
The turning radius is small (making a sharp turn, turning at intersections).
 
When there is a difference in the height between your driving lane and the adjacent
lane.
 
Directly after the Blind Spot Monitoring (BSM) system becomes operable by
changing the setting.
 
If the road width is extremely narrow, vehicles two lanes over may be detected.
The detection area of the radar sensors (rear) is set according to the road width of
expressways.
Loading ...
Loading ...
Loading ...