Loading ...
Loading ...
Loading ...
4
–
114
When Driving
i-ACTIVSENSE
When The System Operates
1. The system goes on operation standby
when the LDWS OFF switch is pressed
and the LDWS OFF indicator light in
the instrument cluster turns off.
2. Drive the vehicle in the centre of the
driving lane while the LDWS OFF
indicator light is turned off. The system
becomes operational when all of the
following conditions are met.


The vehicle is driven in the centre
of the driving lane with the white
or yellow lines on the left and right
sides, or on either side.


The vehicle speed is 70 km/h
(44 mph) or faster.


The vehicle is driven on a straight
road or road with gentle curves.
The LDWS does not operate in the
following cases:


The system cannot detect white or
yellow lines.


The vehicle speed is less than
65 km/h (40 mph).


The vehicle is making a sharp turn.


The vehicle is making a curve at an
inadequate speed.
NOTE
 
The LDWS does not operate until the
system detects a white or yellow line
on either the left or right.
 
When the system detects a white
or yellow line on one side only, the
system will activate the warning only
when the vehicle deviates on the side
where the white or yellow line is
being detected.
 
The distance and warning sensitivity
(likelihood of a warning) which
the system uses to determine the
possibility of a lane departure can be
changed.

Refer to Personalisation Features on
page 9-13 .
Auto cancel
In the following cases, the LDWS cancels
automatically and the LDWS warning
light in the instrument cluster turns on.
 
The temperature inside the camera is
high or low.
 
The windscreen around the camera is
foggy.
 
The windscreen around the camera is
blocked by an obstruction, causing poor
forward visibility.
The LDWS is enabled automatically when
the operation conditions are met, and the
LDWS warning light turns off.
Loading ...
Loading ...
Loading ...