Loading ...
Loading ...
Loading ...
4
–
137
When Driving
i-ACTIVSENSE
NOTE
 
The Mazda Radar Cruise Control (MRCC) system operates when all of the following
conditions are met.
 
The vehicle speed is as follows:
 
(European models)

About 30 km/h (19 mph) to 200 km/h (124 mph)
 
(Except European models)

About 30 km/h (19 mph) to 145 km/h (90 mph)
 
The Mazda Radar Cruise Control (MRCC) system is turned on.
 
The parking brake is not applied.
 
The Smart Brake Support (SBS) is not malfunctioning.
 
The Dynamic Stability Control (DSC) is operating normally.
 
All doors are closed.
 
The driver's seat belt is fastened.

(Manual transaxle)
 
The shift lever is in a position other than reverse (R) or neutral (N).
 
The clutch pedal is not depressed.

(Automatic transaxle)
 
The selector lever is in the drive (D) position or manual (M) position (manual
mode).
 
In the following cases, the warnings may not activate even if your vehicle starts
closing in on the vehicle ahead.
 
You are driving at the same speed as the vehicle ahead.
 
Directly after the Mazda Radar Cruise Control (MRCC) system has been set.
 
When the accelerator pedal is depressed or directly after the accelerator pedal is
released.
 
Another vehicle cuts into the driving lane.
 
The following are not detected as physical objects.
 
Vehicles approaching in the opposite direction
 
Pedestrians
 
Stationary objects (stopped vehicles, obstructions)
 
If a vehicle ahead is travelling at an extremely low speed, the system may not detect it
correctly.
 
During headway control travel, do not set the system on two-wheeled vehicles such as
motorcycles and bicycles.
 
Do not use the Mazda Radar Cruise Control (MRCC) system under conditions in
which the close proximity warnings are frequently activated.
Loading ...
Loading ...
Loading ...