Loading ...
Loading ...
Loading ...
11-60
Maintenance and service
Replacement of wiper blades
Grease, wax, insects, or other materials on the wind-
shield or the wiper blade results in jerky wiper opera-
tion and streaking on the glass. If you cannot remove
the streaks after operating the windshield washer or if
the wiper operation is jerky, clean the outer surface of
the windshield (or rear window) and the wiper blades
using a sponge or soft cloth with a neutral detergent or
mild-abrasive cleaner. After cleaning, rinse the wind-
shield and wiper blades with clean water. The wind-
shield is clean if beads do not form when you rinse the
windshield with water.
" Do not clean the wiper blades with gasoline
or a solvent, such as paint thinner or benzene.
This will cause deterioration of the wiper
blades.
" When you wish to raise the passenger-side
wiper arm, first raise the driver-side wiper arm.
Otherwise, the passenger-side wiper assembly
and driver-side wiper assembly will touch each
other, possibly resulting in scratches.
" Return the passenger-side wiper arm to its
original position before returning the driver-
side wiper arm to its original position. Other-
wise, the passenger-side wiper assembly and
driver-side wiper assembly will touch each oth-
er, possibly resulting in scratches.
If you cannot eliminate the streaking even after follow-
ing this method, replace the wiper blades using the fol-
lowing procedures:
! Windshield wiper blades assembly
1. Raise the windshield wiper arm on the driver’s side.
2. Next, raise the windshield wiper arm on the pas-
senger’s side.
Loading ...
Loading ...
Loading ...