Loading ...
Loading ...
Loading ...
3-15
Instruments and controls
– CONTINUED –
! Canceling the function for meter/
gauge needle movement upon turning
on the ignition switch
It is possible to activate or deactivate the movement of
the meter needles and gauge needles that takes place
when the ignition switch is turned to the “ON” position.
Turn the ignition switch to the “ACC” position. With the
A trip meter indication selected, briefly press the trip
knob twice. You can now establish the activated/deac-
tivated setting for movement of the meter needles and
gauge needles. To change the current setting, press
the trip knob for at least two seconds.
: Activated
: Deactivated
Briefly press the knob to return to the A trip meter indi-
cation.
If you turn the ignition switch to the “LOCK” position,
turn the ignition switch to the “ON” position, or open
and close the driver’s door during the setting proce-
dure, the new setting will be canceled. Also, if you do
not press the trip knob for a period of 10 seconds, the
new setting will be canceled.
NOTE
It is not possible to cancel sequential illumination
of the combination meter while sequential illumi-
nation is actually taking place. Cancel sequential
illumination when regular illumination (for driving)
has begun.
! Speedometer
The speedometer shows the vehicle speed.
UB3533AA
Loading ...
Loading ...
Loading ...