Loading ...
Loading ...
Loading ...
3-12
Instruments and controls
remaining in the tank.
When the ignition switch is in the “LOCK” or “ACC” po-
sition, the fuel gauge shows “E” even if the fuel tank
contains fuel.
The gauge may move slightly during braking, turning
or acceleration due to fuel level movement in the tank.
If you press the trip knob while the ignition switch is in
the “LOCK” position, the fuel gauge’s dial, needle, and
rim will light up and the needle will indicate the amount
of fuel remaining in the tank.
If, while the fuel gauge needle is indicating the amount
of fuel remaining in the tank, you (a) do not press the
trip knob for 10 seconds or (b) open and close the driv-
er’s door, the fuel gauge needle will drop to the “E” po-
sition and the dial, needle, and rim will go off.
The rim of the fuel gauge flashes five time when the
amount of remaining fuel reaches 2.6 US gal (10 liters,
2.2 lmp gal).
If you turn the ignition switch to the “LOCK” position
and back to the “ON” position, the rim will again flash
five times.
UB3211BA
Loading ...
Loading ...
Loading ...