Loading ...
Loading ...
Loading ...
Piston/Piston Rings/Piston Pin
76 Servicing Your Honda
Piston/Piston Rings/Piston Pin
1. Clean the area above the engine before
disassembly to prevent dirt falling into the
engine.
2. Drain the radiator coolant after cooling the
motorcycle (page 145).
3. Remove the seat and hang the fuel tank (pages
33, 34).
4. Remove the left and right mufflers (page 100)
and subframe (page 37).
5. Remove the exhaust pipe (page 103).
6. Remove the spark plug (page 66).
7. Remove the cylinder head cover (page 67).
8. Set the piston at TDC on the compression
stroke (page 67).
9. Remove the camshaft holder, camshaft, valve
lifters and shims (page 69).
10. Disconnect the ignition coil connectors (1).
Remove the ignition coil (2) by removing the
bolts (3).
11. Disconnect the ECT sensor connector (4).
12. Loosen the radiator hose clamp screw (5) and
disconnect the radiator hose (6).
13. Disconnect the crankcase breather tube A (7)
and B (8) from the air cleaner connecting tube.
14. Disconnect the IAT sensor connector (9).
15. Loosen the screw (10) on the air cleaner
connecting tube clamp (11).
Cylinder Head Removal
(1) ignition coil connectors (3) bolts
(2) ignition coil
(3)
(2)
(1)
(4) ECT sensor connector
(5) radiator hose clamp screw
(6) radiator hose
(4)
(6)
(5)
(7) crankcase breather tube A
(8) crankcase breather tube B
(9) IAT sensor connector
(10) screw
(11) air cleaner connecting tube clamp
(8)
(9)
(7)
(10)
(11)
Loading ...
Loading ...
Loading ...