Loading ...
Loading ...
Loading ...
Servicing Your Honda 75
Valve Clearance
1. Check that the spark plug hole packing (1) is in
good condition and replace it if necessary.
Apply engine oil to the spark plug hole packing
and install it to the cylinder head cover (2).
2. Check that the cylinder head cover packing (3)
is in good condition and replace it if necessary.
Install the cylinder head cover packing into the
cylinder head cover groove.
3. Check that the rubber seals (4) are in good
condition, replace them if necessary.
Install the rubber seals onto the cylinder head
cover with the “UP” marks (5) facing up.
4. Install and tighten the cylinder head cover
socket bolts (6) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
5. Connect the spark plug cap (7) and breather
tube (8).
6. Install the fuel tank and seat (pages 33, 35).
Cylinder Head Cover Installation
(1) spark plug hole packing
(2) cylinder head cover
(3) cylinder head cover packing
(2)
(3)
(1)
(4) rubber seals
(5) “UP” marks
(6) cylinder head cover socket bolts
(4)
(5)
(5)
(6)
(7) spark plug cap
(8) breather tube
(7)
(8)
Loading ...
Loading ...
Loading ...