Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 28
Soluon Solenoid – Press the Soluon Switch to cycle the soluon solenoid on and o. Listen for the Solenoid to click on
and o. Press the switch again to stop cycling the solenoid. The LCD display for “SOL” will show “On” as long as the test
mode is running; that is when the controller is trying to cycle the solenoid both on and o. The LCD display for “SOL” will
show “O” when the test mode is ended.
Brush Motor Contactor – Press the Scrub On/O Switch to energize the brush motor contactor. Listen for the contactor
to click and look to see if the brushes are rotang. Press the switch again to de-energize the contactor. The LCD display
for “BR” will show “On” when the controller is trying to energize the contactor and “O” when it is not.
Vacuum Motor Relay – Press the Vacuum/Wand Switch to energize the Vacuum Motor Relay. The vacuum motor should
come on. Press the switch again to de-energize the relay. The LCD display for “VAC” will show “On” when the controller is
trying to energize the relay and “O” when it is not.
Detergent Pump – Press the Detergent On/O Switch to cycle the detergent pump on and o. Listen for the pump to op-
erate. Press the switch again to stop cycling the pump. The LCD display for “CP” will show “On” as long as the test mode
is running; that is when the controller is trying to cycle the pump both on and o. The LCD display for “CP” will show
“O” when the test mode is ended.
Input Tests
When in the service test mode the LCD display can be used to validate certain inputs.
Baery Voltage – The LCD will display the baery voltage seen by the Main Machine Controller when in the Service test
mode.
Speed Control Forward/Reverse Signal AND Reverse Signal – The Main Machine controller interprets these two signals
that it receives from the Drive Motor Controller and displays the informaon on the LCD.
• OFF = Neutral
• FWD = Forward
• REV = Reverse
Move the drive paddle in all three direcons. If all 3 values
are displayed correctly both of these inputs are working
correctly.
Loading ...
Loading ...
Loading ...