Nilfisk SC800 ST User Manual

Loading ...

Service Manual: SC750, SC800, SC 750 ST, SC800 ST

Form Number 56043150 Page 157

Palm Buon Switches – ST models

1. Remove two switch mounng screws.

2. Remove upper handle bolts.

3. Loosen lower handle bolts and rotate handle down.

4. Remove access plate.

5. Disconnect wiring. Make sure you carefully record

the wire colors and their posions so that you will

be able to reconnect them correctly.

6. Remove switch and wiring.

a. Tip – To make it easier to install a new

switch, use a spare piece of wire aached

to the wires of the old switch when you pull

it out. Aach the new switch wires to the

spare wire to pull the wiring back through

the handle.

7. Reassemble in reverse order.

Reverse Switch – ST models

1. Remove upper handle bolts.

2. Loosen lower handle bolts and rotate handle down.

3. Remove access plate.

4. From inside the handle area, push the reverse

switch out of the handle.

5. Disconnect wiring and remove. Make sure you care-

fully record the wire colors and their posions so

that you will be able to reconnect them correctly.

6. Reassemble in reverse order.

Loading ...

Nilfisk SC800 ST Heavy-Duty Cleaning