Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 129
Specifications
Scrub Motor Amp Draw
No Load - Approximately 16-19 Amps (one motor).
Note: Only run the test for a few seconds. Remove the pads before tesng no load amp draw as the motor will spin the
pad driver around 2,000 RPM and may throw the pad.
Scrub Motor Total Amp Draw
Total amp draw will vary widely based on oor surface, soluon ow and pad type. You may see anywhere from 12 - 32
Amps (both motors) when stripping or scrubbing.
Epoxy oor and red pads, normal scrub mode. Measured 25-26 Amps.
Epoxy oor and red pads, extreme scrub mode. Measured 28-10 Amps.
Scrub Motor Speed
Approximately 2,000 RPM
Scrub Force
Regular Scrub = 70.4 lbs. (31.9 kg)
Extreme Scrub = 170 lbs. (77.1 kg)
Brush Head Actuator Amp Draw
Upward with weight of deck – Approximately 2 Amps
Brush Contactor
Winding Resistance – 55 ohms
Gas Spring
Force – 112 pounds (500 N)
Loading ...
Loading ...
Loading ...