Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 159
Paddle Position Sensor – Non-ST models - SC750,
SC800
Photos are shown working on a bench top but this can be
done on the machine.
1. Remove top two handle mounng bolts.
2. Loosen the boom two handle mounng bolts and
rotate handle down.
3. From the back side of the paddle, remove the 4
screws securing the front cover. Remove the front
cover.
4. Disconnect wiring from the potenometer. Make
sure you carefully record the wire colors and their
posions so that you will be able to reconnect them
correctly.
5. Remove the cam controller.
Loading ...
Loading ...
Loading ...