Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/Nilfisk-SC800-manual/bg7f.png)
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 127
6. Install the spring washer so that the “ngers” will press against the outside bearing race.
7. Install the end cover in stages.
a. Install it far enough so that the brushes will contact the commutator when the temporary retaining wires
are removed. Then remove the wires.
b. Fully seat the end cover.
c. Install the through bolts.
d. Seal the retaining wire holes in the end cover with silicone sealant.
Fingers
against Outer
Race
Carbon Brush
Commutator
Loading ...
Loading ...
Loading ...