Nilfisk SC800 ST User Manual

Loading ...

Service Manual: SC750, SC800, SC 750 ST, SC800 ST

Form Number 56043150 Page 137

Squeegee System

Functional Description

The squeegee collects the water so that the recovery system vacuum can suck it up o the oor and store it in the recov-

ery tank. The squeegee support is spring loaded downward to push the squeegee against the oor, and has a pivot point

that allows the squeegee to “swing” around corners. The squeegee tool rides along the oor on two small wheels and

is raised and lowered with a hand operated lever. To prevent damage to the squeegee tool in the event that the tool is

caught by an obstacle, it is mounted to the support frame in sloed holes and is fastened by two hand ghtened “wing

nuts”. The squeegee angle can be adjusted for opmum oor wiping. The squeegee tool has a front and a rear blade.

Each blade has 4 working edges that can be used before the blade is replaced. The front squeegee blade has slots along

the boom edge to allow the necessary air ow to carry the water. The rear squeegee blade edge is at.

Component Locations

• Squeegee Support

• Squeegee Tool

• Squeegee Li Lever

• Break Away Slots

• Tilt Adjustment Knob

Loading ...

Nilfisk SC800 ST Heavy-Duty Cleaning