Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 123
2. Press the bearing into the driver motor.
3. Install the bearing retainer.
4. Press the eccentric into the bearing.
5. Install a new gasket on the driver motor with the adhesive side toward the driver motor.
6. Apply Locte An-seize (90101A) to the bore of the eccentric.
Motor Plate and Isolators
Removal
1. Remove the brush head from the machine.
2. Remove the brush motor.
3. Remove the retaining bolts, large washers and sleeves.
4. Remove the motor plate by removing the 4 isolator nuts.
Remove
Remove 4
isolator nuts
Inspect Splash
Shield
Loading ...
Loading ...
Loading ...