Loading ...
Loading ...
Loading ...
Problem Cause/solution
I cannot hear a dial tone. R Make sure that you are using the supplied telephone line
cor
d. Your old telephone line cord may have a different
wiring configuration.
R The hub’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the hub from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your phone
service provider.
The hub beeps. R New messages have been recorded. Listen to the new
mes
sages (page 35).
I cannot set date and time. R You cannot set date and time with the handset. The time
set
ting of the system is configured with the date and time
of the mobile device registered to the hub. If a mobile
device is not registered to the hub, register it to the hub by
following the instructions in the System Setup Guide of
the hub.
I cannot use the handset alarm
or n
ight mode.
R The date and time is not set. The time setting of the
system is configured with the date and time of the mobile
device registered to the hub. If a mobile device is not
registered to the hub, register it to the hub by following the
instructions in the System Setup Guide of the hub.
Menu list
Problem Cause/solution
The display is in a language I
cann
ot read.
R Change the display language (page 13).
I cannot register a handset to a
hub.
R T
he maximum number of handsets (6) is already
registered to the hub. Cancel unused handset
registrations from the hub (page 32).
R You entered the wrong hub PIN. If you forget your PIN,
contact an authorised service centre.
Battery recharge
Problem Cause/solution
The handset beeps and/or
blinks.
R Battery charge is low. Fully charge the batteries (page 10).
I f
ully charged the batteries, but
still blinks,
the
operating time seems to
be shorter.
R Clean the battery ends (
, ) and the charge contacts
with
a dry cloth and charge again.
R It is time to replace the batteries (page 10).
49
Useful Information
HNH100AZ_(en_en)_0327_ver.041.pdf 49 2015/03/27 14:44:08
Loading ...
Loading ...
Loading ...