Loading ...
Loading ...
Loading ...
4 Proceed with the operation according to
you
r selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M
N.
a MO
KN
5 S
e
t the desired time. a MOKN
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
6 Enter a text memo (10 characters max.).
a MOKN
7 MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MbN: Select the desired snooze setting.
a MOKN
9 MOKN a MeN
Note:
R Press M
N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M N to stop the
sou
nd but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each unit.
Using the phonebook’s category feature
(page 20), you can also select categories of
callers whose calls override night mode and
ring the handset (Caller ID subscribers only).
Important:
R Make
sure the unit’s date and time setting
is correct. The time setting of the system is
configured with the date and time of the
mobile device registered to the hub. If a
mobile device is not registered to the hub,
register it to the hub by following the
instructions in the System Setup Guide of
the hub.
R If you have set the handset alarm, the
alarm sounds even if the night mode is
turned on.
Turning night mode on/off
1 M
N#238
2 MbN: Se
lect the desired setting. a MOKN
R If you select “Off”, press MeN to
exit.
3 Enter the desired hour and minute you
wish to start this feature. a MOKN
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
4 Enter the desired hour and minute you
wish to end this feature. a MOKN
5 MeN
Changing the start and end time
1 M
N#237
2 Cont
inue from step 3, “Turning night
mode on/off”, page 29.
Setting the ring delay
This
setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select “No Ringing”,
the handset never rings during night mode.
1 M
N#239
2 MbN: Se
lect the desired setting. a MOKN
a MeN
Note:
R When the answering system answers the
call, this feature does not work.
29
Programming
HNH100AZ_(en_en)_0327_ver.041.pdf 29 2015/03/27 14:44:07
Loading ...
Loading ...
Loading ...