Loading ...
Loading ...
Loading ...
Home Network System
inte
gration
If you have other devices registered to the
hub, such as cameras, sensors, and smart
plugs, you can use the handset as an
integrated part of the Home Network System.
Specifically, you can use the handset to:
– arm and disarm the alarm system
(page 41).
– receive notifications when the sensors are
triggered.
– display the status of each sensor
(page 42).
– turn smart plugs on and off (page 43).
Alarm system features
You
can use the handset to arm and disarm
the alarm system. If the system’s sensors are
triggered when the system is armed, such as
when motion is detected or when a door or
window is opened:
– the handset and hub sound an alert.
– the handset displays information about the
detection.
– the handset announces the detection.
(Talking notification feature; page 42)
– the hub LED indicator blinks in red.
– the M
N button on the handset blinks.
Add
itional features and settings are available
when using the Home Network app
(page 43).
Arming and disarming the
system
The alarm system has 3 modes.
– “At Home”: Door and window sensors are
armed.
*1
– “Away”: All sensor devices are armed.
*1
– “Disarm”: All sensor devices are disarmed.
R The hub LED indicator lights in red when
the arm mode is set to “At Home” or
“Away”.
*1 Default settings. These settings can be
chan
ged when using the Home Network
app. For more information, refer to the
User’s Guide (page 44).
Important:
R You will be requested to enter a disarm PIN
while operating this system. We
recommend changing the PIN from the
default before operating the system
(default: “0000”, page 42).
n To arm the system:
1 M
N
2 MbN:
S
e
lect “At Home” or “Away”. a
MOKN
R If the system is indicating that it has
been triggered (such as when the alert
is sounding), the mode cannot be
changed to “At Home” and “Away”.
3 Enter the disarm PIN (default: “0000”,
page 42) if prompted. a MOKN
R When you select “Away”, you need to
press MOKN to activate the mode. The
hub sounds an alert for 3 minutes; this
gives you time to leave home before
the sensors can be triggered (Exit
delay time). The sensors will be armed
when the alert stops.
Note:
R If the system detects that a window or door
is still open when you arm the alarm
system, the handset will notify you. Close
the window or door and then press MOKN.
n To disarm the system:
1 M
N
2 MbN: “Dis
arm” a MOKN
3 Enter the disarm PIN (default: “0000”,
page 42). a MOKN
Note:
R By default, after door sensors and motion
sensors make a detection, the system gives
you 1 minute to disarm the system (Entry
delay time). During this time, the entry
delay alert will sound. If you do not disarm
the system in time, the sensors are
triggered and the hub and handset sound
an alert.
41
Home Network System Integration
HNH100AZ_(en_en)_0327_ver.041.pdf 41 2015/03/27 14:44:07
Loading ...
Loading ...
Loading ...