Loading ...
Loading ...
Loading ...
Note:
R When
editing, press the desired dial key to
add, MCN to erase.
Erasing all call block numbers
1 M
N#217
2 MbN: “Sin
gle Number” or “Range of
Numbers” a MOKN
3 M
N a MbN: “Era
se All” a MOKN
4 MbN: “Yes” a MOKN
5 MbN: “Yes” a MOKN a MeN
Other programming
Changing the handset name
You
can customise the name of your handset.
This can help you easily identify handsets
when making intercom calls, transferring calls
to other handsets, etc. You can select whether
or not the handset name is displayed in
standby mode. The default setting is “No”. If
you select “Yes” without entering any handset
name, “Handset 1” to “Handset 6” is
displayed.
1 M
N#104
2 E
n
t
e
r the desired name (10 characters
max.). a MOKN
3 MbN: Select the desired setting. a MOKN
2 times a MeN
Storing an area code to be
dele
ted automatically
In some situations, phone numbers stored
automatically in the caller list (page 17) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
“09”. If you make a call from the caller list to
the phone number “09-456-7890”, the unit
dials “456-7890”.
1 M N#255
2 Ente
r an area code (5 digits max.). a
MOKN a MeN
Note for New Zealand:
R The use of this feature can prevent a
National Call from being dialled. E.g., in the
case of the South Island, the “03” will be
omitted and will therefore prevent a
National Call to other areas of the South
Island.
Call restriction
You
can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1 M
N#256
2 Ente
r the hub PIN (default: “0000”).
R If you forget your PIN, contact an
authorised service centre.
3 MbN: Select the desired unit. a M
N
R All
handsets registered to the hub are
displayed.
R “
” is displayed next to the selected
hand
set numbers.
R To cancel a selected handset, press
M
N again. “ ” disappears.
4 MOKN
5 Sel
ect a memory location by pressing 1
to 6. a MOKN
6 Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
R You can also select your mobile device in
this feature using a handset, if your mobile
device is registered to the hub. For more
information, refer to the User’s Guide
(page 44).
Changing the hub PIN
Impo
rtant:
R If you change the hub PIN (Personal
Identification Number), please make note of
31
Programming
HNH100AZ_(en_en)_0327_ver.041.pdf 31 2015/03/27 14:44:07
Loading ...
Loading ...
Loading ...