Loading ...
Loading ...
Loading ...
Additional settings
70
If in the Release menu you have
selected the Block option, or if you
have set the Additional settings menu up for access via a PIN code,
you have to enter a PIN code.
Settings within the Additional settings menu can then only be changed
by people with administration rights.
The PIN code is set at the factory to 8 0 0 0 if access in Additional set-
tings is b
locked.
In this instance, the display will show the following message:
Enter code
0 0 0 0
Use the
and arrow buttons to enter the numerical values and
confirm each one with the
OK butt
on.
Each press of the OK b
utton takes the highlighting to the next input
position automatically.
Each digit entered is replaced by an asterisk (*).
The protected settings are released once all digits have been correct‐
ly ent
ered.
If the PIN code is entered incorrectly, the following message will ap‐
pear in the display:
K
OK
Wrong code entered
Confirm the message with the OK butt
on.
The display will then revert to the input menu.
Enter PIN code
Loading ...
Loading ...
Loading ...