Loading ...
Loading ...
Loading ...
Electrical connection
109
Electrical connection
All electrical work must be carried out by a suitably qualified
el
ectrician in accordance with local and national safety regulations.
– The plug connection must comply with national regulations. (The
electrical
outlet must be accessible after the appliance has been in‐
stalled.)
– If the appliance is hard wired, a multiple-pole circuit breaker must
b
e used. The circuit breaker must have a contact opening width of
at least 3 mm and be lockable in open position.
– To increase safety, it is recommended that the machine be con‐
nect
ed to a ground fault circuit breaker with a tip current of 30 mA.
– If necessary, equipotential bonding must be carried out.
– The power cord may only be replaced by an original Miele part.
– For technical data, see the data plate or the attached wiring dia‐
gr
am!
The appliance must only be operated with the voltage, frequency, and
fuse r
ating shown on the data plate.
This appliance can be con
verted to a different type of power sup‐
ply in accordance with the conversion diagram and wiring diagram
supplied.
The c
onversion diagram and the data plate are supplied with the
appliance.
The ground lead must be connected to the screw connection point
(mark
ed with the ground symbol ) at the back of the machine.
WARNING
THIS APPLI
ANCE MUST BE GROUNDED
Grounding con‐
nection
Loading ...
Loading ...
Loading ...