Loading ...
Loading ...
Loading ...
Plumbing
110
Connecting the water supply
T
he water in the dishwasher is NOT safe to drink!
Do not re-use removable hose attachments. Use the hose supplied
with thi
s dishwasher.
– The dishwasher must be connected to the water supply in accord‐
ance with local
regulations.
– The water used must at least comply with regulations for drinking
w
ater quality. If the water supply has a high iron content, there is a
danger of corrosion occurring on items being cleaned in the dish‐
washer, as well as the appliance itself. If the chloride content of the
water exceeds 100 mg/l the risk of corrosion to items being cleaned
in the dishwasher will be further increased.
– In certain regions (e.g. mountainous regions), the water composi‐
tion may cause precipitates to form, requiring the use of softened
water for the dishwasher.
– A backflow preventer is not required; the dishwasher corresponds
w
ith the valid standards for the protection of drinking water.
– The water pressure (flow pressure) must amount to at least 200 kPa
overpr
essure (200 kPa = 29 psi). At a water pressure (flow pressure)
below 200 kPa, the water intake time extends automatically. The
maximum permissible static pressure amounts to 1000 kPa (over‐
pressure) (1000 kPa = 145.04 psi). If the water pressure does not lie
in the 200-1000 kPa range (29 - 145.04 psi), ask Miele Service how
to proceed.
– The dishwasher is supplied as standard for connection to cold wa‐
t
er (blue-coded hose) and hot water up to 150°F / 65°C (red-coded
hose). Connect the inlet hoses to the water faucet valves for cold
and hot water.
– If there is no hot water supply, the intake hose with the r
ed marking
must also be connected to the cold water supply.
– Connect the intake hose for the steam condenser (without water
p
rotection device) to a cold water faucet.
– A water faucet valve with a 3/4" male thread must be provided on
sit
e. It should be easily accessible so that the water supply can be
turned off when the appliance is not in use.
– The intake hose is an approx. 5' 7" (1.7 m) long pressure hose DN
10 with a 3/4 inch screw connection. For the extension, a 5' 7" (1.7
m) long, flexible metal hose (test pressure 140 bar) is available. The
dirt filter in the screw connection may not be removed.
– Install the coarse filter (supplied in accessory pack) between the
w
ater faucet valve and the inlet hose
(see Cleaning and care, Water inlet").
Loading ...
Loading ...
Loading ...