User Manual - Page 51

For 2011 3008 HYBRID 4.

Loading ...
Loading ...
Loading ...
4
9
Warning lamps
When the engine is running or the vehicle is being driven, the illumination of one of the following warning lamps indicates
a fault which requires action on the part of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in
the multifunction screen.
If you encounter any problems, do not hesitate to contact a PEUGEOT dealer or a quali ed workshop.
Warning lamp is on Cause Action/Observations
STOP
xed, associated
with another warning
lamp, accompanied
by an audible signal
and a message in
the screen.
It is associated with the
braking system, the power
steering, the engine oil
pressure, the engine coolant
temperature or the hybrid
system.
Stop as soon as it is safe to do so.
Park, switch off the ignition and call a
PEUGEOT dealer.
Service
temporarily.
A minor fault has occurred
for which there is no speci c
warning lamp.
Identify the fault by reading the message
shown on the screen, such as, for example:
- the hybrid system,
- the closing of the doors, boot or bonnet,
- the engine oil level,
- the screenwash level,
- the remote control battery,
- saturation of the particle emission
lter (Diesel).
For any other faults, contact a PEUGEOT
dealer.
xed.
A major fault has occurred
for which there is no speci c
warning lamp.
Identify the fault by reading the message
shown on the screen and contact a
PEUGEOT dealer.
(PEF:
particle
emissions
lter, Diesel)
xed, associated
temporarily with a
message on the risk
of FEP lter blockage.
This indicates the start of
saturation of the particle
emissions lter.
As soon as traf c conditions permit,
regenerate the lter by by driving at a
speed of of least 36 mph (60 km/h) until
the service warning lamp goes off.
xed.
This indicates the low level of
the Diesel additive reservoir.
Have it topped up as soon as possible
by a PEUGEOT dealer.
Loading ...
Loading ...
Loading ...